Lead/rhythm guitar 12" speaker, 8 or 16 ohm. Very powerful, thick and chunky tone. Very touch sensitive with good sustain. Awesome bottom end.

The Mod® Electronics MOD 102 is a great place to start for those interested in building their own tube amp. It is based on a classic American tube-circuit design combined with a British style Class A output tube section. At low volume it produces a clean chimey tone that moves into smooth overdrive at higher volumes. All parts are included along with a pre-drilled steel chassis, wire and tubes (1 EL84 and 1 12AX7). Puts out at least 5 watts. The chassis layout is open for easy assembly using the clear, easy to follow instructions.

The Mod® Electronics MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with added additional “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.

Black polyester cover or '65 Deluxe Reverb, black. Designed to fit '65 Deluxe Reverb® Reissue (1993-present) and Super-Sonic™ 22 Combo (2010-present) amplifiers

Vintage style using only the finest tolex available.

• Height: 14"
• Width: 17"
• Depth: 7"

Vintage style using only the finest tolex available.

• Height: 19"
• Width: 26.5"
• Depth: 11"

Vintage style using only the finest tolex available.

• Height: 11"
• Width: 30"
• Depth: 9"

Vintage style using only the finest tolex available.

• Height: 8.5"
• Width: 22.5"
• Depth: 10"

Vintage style using only the finest tolex available.

• Height: 30"
• Width: 30"
• Depth: 14.5"

Vintage style using only the finest tolex available.

• Height: 16"
• Width: 20.5"
• Depth: 9"

Black polyester amplifier cover for '65 Twin Reverb Reissue, black. Designed to fit '65 Twin Reverb® Reissue amplifiers (1992-present)

High quality powder coated amp-top enclosures from Hammond’s 1454 Series. These cases are a great choice for amp top effects such as the Dallas Rangemaster. Features

• Made of strong, economical 20 gauge steel.
• Rugged powder coat finish: beige panels with textured black covers.
• Choice of sloping or vertical front panels by reversing the case.
• 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

For 1993 Super, 2001 Super Reverb (fits all). Fits the 2001 reissues and the original 60s amps. It might not fit on all the 70s versions. Dimensions: Height: 24" Width: 25" Depth: 9" top, 10 ½" bottom

Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"

Vintage style using only the finest tolex available.

• Height: 17"
• Width: 25"
• Depth: 9.5"

Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.

• Blank brown nylon cover
• Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
• Height: 16" (40.64 cm)
• Width: 18" (45.72 cm)
• Depth: 9.18" (23.31 cm)

For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom

Vintage style using only the finest tolex available.

• Height: 29"
• Width: 30"
• Depth: 14"

Fits straight 4 X 12 cabinets.
Vinyl Cover for Marshall 1960B Straight-front Cabinet, with Piping and Marshall Logo

Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.

• Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
• Standard 2x12 fits AD30TC / RK50C / CR120

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.

• 11/16" chassis hole
• Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
• Rating: 125V, 75W
• Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123

Circular clamp for mounting multi-section can capacitors directly to chassis. This clamp is for use with 1 3/8" (1.375") diameter capacitors. Includes one clamp with tightening hardware. Mounting hardware is sold separately.

• Mounting hole center to center - 1.938"
• Mounting holes - .188" x .281"

The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.

Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts. 19mm Skirt:

• Height: 0.61 in. (15.5 mm)
• Diameter: 0.74 in. (19 mm)
• Fits ¼" shaft with set screw

28mm Skirt:

• Height: 0.61 in. (15.5 mm)
• Diameter: 1.1 in. (28 mm)
• Fits ¼" shaft with set screw

42mm Skirt:

• Height: 0.79 in. (20 mm)
• Diameter: 1.645 in. (42 mm)
• Fits ¼" shaft with set screw