Nut - Gold Tone, Zero Glide Blank (Unslotted)

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

W-QP-NUT-H Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-K for the knurled, slotted version of this nut. See W-QP-WASHER for compatible washer
$0.15
W-QP-NUT-K Nut - Knurled, for mounting Qingpu 3.5mm jacks
Knurled, slotted nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-H for the hex version of this nut. See W-QP-WASHER for compatible washer See S-TND-2X for nut driver tool
$0.15
W-QP-NUT-PJ-H Nut - Hex, for mounting Qingpu PJ3410 3.5mm jacks
Hex nut for W-QP-PJ3410 3.5mm jacks. See W-QP-NUT-PJ-R for the round, slotted version of this nut.
$0.15
W-QP-NUT-PJ-R Nut - Round, for mounting Qingpu PJ3410 3.5mm jacks
Knurled, slotted nut for W-QP-PJ3410 3.5mm jacks.
See W-QP-NUT-PJ-H for the hex version of this nut.
See S-TND-2X for nut driver tool
$0.15
S-H9NT Nut - Cliff, Hex, for mounting ¼" Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
P-H54-DRESS-X Nut - Dress Nut, For Mini Toggle Switches
Colors Available:
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Starting at $0.75
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Starting at $1.20
package of 10
W-QP-NUT-BRASS Nut - Mod® "Top Brass", for Qingpu and other 3.5mm jacks
Mod® "Top Brass" nuts are the easiest way to upgrade your Eurorack module or other 3.5 mm application to a more regal look - we call it "Top Brass". Designed with the same outer dimensions as Qingpu knurled nuts, these round brass nuts will fit any module using Qingpu or other similar metal-bushing jacks without covering up the jack labels. As their name implies, the Mod® "Top Brass" nuts are made out of pure brass, and while they look incredible on their own, their appearance also pairs extremely well with the immersion gold used on Make Noise and other similar modules. Rather than being knurled, Top Brass nuts have a smooth outer edge for a clean look. The nuts are slotted and will work with all existing nut drivers intended for use with the knurled Qingpu-style nuts. "Top Brass" nuts use M6x0.5 threading which matches the bushing on the ubiquitous Qingpu jacks and many of their copies.
$0.35
W-SC-W056 Nut - replacement for Switchcraft, Deep Thread, Knurled
Colors Available:
Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the body enough. Switchcraft toggles come stock with a flat washer and thicker bodied guitars with carved tops or Les Paul guitars with a selector ring require a nut with longer reach. These nuts will attach your switch to the nut through the body with no issues.
  • Fits genuine Switchcraft switches
  • Available in gold or nickel finish
  • Sold individually
Starting at $2.15
R-VNUT-M7 Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually
$0.25
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.25
package of 10
S-HM300N Nut - Marshall style, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    $1.75
    R-VC-NUT Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
    Replacement nut for CTS 450 series potentiometers and others.
    • 3/8-32 threading
    • Sold individually
    $0.55
    P-H52-NUT-DRESSX Nut - Large Dress Nut, Carling, 15/32-32UNS
    Colors Available:
    Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
    $1.29
    R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
    Replacement nut and washer for pots with a ⅜" bushing diameter.
    $0.75
    P-H54-DRESS-THRU Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.25
    S-H9NT-R Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
    Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
    $0.89
    S-HHNX Nut - Hex finished, fine thread, zinc
    Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
    Starting at $0.30
    package of 5
    S-HBNX Nut - Hex, Brass, Imperial Thread
    Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.
    Starting at $1.09
    package of 5
    S-HCN-M6 Nut - Cage, Zinc-plated Steel, M6, Panel Range .064-.105”
    Common replacement for Marshall heads and many other applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening. Fits panels 0.064" to 0.105" thick with square holes cut 0.375" to 0.38".
    • M6 Threading
    • Panel Range .064”-.105”
    • Fits 0.375" to 0.38" Square Holes
    • Zinc Finish
    • Sold Individually
    $1.39
    S-H9NT-W Nut - Cliff, Hex, for ¼" white Jacks
    Hex nut for white Cliff Jacks, threading: 7/16-20. Also used on the footswitch jack in some Marshall amps.
    $0.89
    P-GTNN18 Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
    High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
    • Measures 56 mm x 11 mm x 6.35 mm
    • Sold individually
    $4.25
    On Backorder
    S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
    M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
    $1.55
    package of 5
    P-H54-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.15