Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.

Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.

Washer fits around sockets to hold them to chassis.

Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.

8-pin octal base made of brown phenolic. This base is shorter than the P-SP8-479 base and matches bases used on many common octal tubes. The base has a 5/8“ height with approximately 7/16” of internal mounting depth.

Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.

Replacement 4-pin tube base for use with tubes such as the 811A or 300B.

8 pin tube base with gold pins. Outer Diameter: 1.20" Inner Diameter: 1.16" Height (not including pins or keyway): 0.79"

8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"

Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes

• Bottom, PC mount
• ¾” chassis hole required
• ¾” tail diameter

High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:

• Panel saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorus bronze terminal pin with solder plating
• Glassfiber filled PPS insulating material.

Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes

• Fits ¾" chassis hole diameter
• See P-SS9-400 for a compatible tube shield

High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle. These red dampening rings are rated for temperatures up to 240°C and come in various sizes to fit a variety of tubes. Please verify your tube sizes to ensure a proper fit.

• 20mm: Recommended size for 12A_7 (i.e. 12AX7, 12AT7, 12AU7, etc.) types, EL84, or any other tube with a ~20mm diameter.
• 28mm: Recommended size for 6V6, 6SN7, 5AR4, or any other tube with a ~28mm diameter.
• 30mm: Recommended size for some EL34, Svetlana EL34, JJ GZ34, Gold Lion KT77, or any other tube with a ~30mm diameter.
• 32mm: Recommended size for some EL34, 6L6, 6CA7, or any other tube with a ~32mm diameter.
• 35mm: Recommended size for 6L6GC, 5U4G, 6146B, or any other tube with a ~35mm diameter.

New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.

Protect your preamp tubes and customize them to suit your style with these colorful aluminum tube shields.

Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-1/2" mounting centers. Super high quality. Spring plate with Nickel plating. Please Note: This tube clip will not work with socket P-ST8-500

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Easy mount with collar attached socket
• 1-⅛" mounting centers
• Fits ¾" chassis hole
• Top mount

(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket