Reverb Tank - Mod® 8EB2C1B, Medium Decay, 3-Spring
- Replaces: 8EB2C1B
- Solid, sturdy construction
- Type: Short (3 Spring) tank
- Decay: medium decay
- Input: 800 Ω
- Output: 2,575 Ω
- Connectors: Input insulated/output grounded
- Locking: No lock
- Mounting: Horizontal/open side down
Compatible amps include Fender® Blues Jr., Deluxe 90, Princeton 65, Stage Series, Acoustasonic Junior, Vaporizer, Ultimate Chorus, Ultra Chorus, Sidekick Keyboard 60, Sidekick Reverb 35, Super 60, Super 112, Frontman 65R, Eighty-Five, Tech 21® Trademark 30, Epiphone® Valve Junior Hot Rod, Vox® AC15CC, AC15C, Ultra 60/120, Backstage, Valveking, plus others.
The Mod Electronics Reverb Tanks are high quality upgrade units. Some of the major differences between the Mod®s and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond Accutronics tanks from the 1960s were also wired directly to their respective RCA jacks. In addition, very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Questions about reverb tanks? See our tech articles for more information.
Connectors | input insulated, output grounded | ||
Decay Time | medium (1.75 to 3.0 s) | ||
Grommet Hole Diameter | 0.2 in. | ||
Input Impedance | 800 Ω | ||
Item Height | 1.5 in. | ||
Item Length | 9.25 in. | ||
Item Width | 3.38 in. | ||
Mounting Hole Center to Center A | 8.56 in. | ||
Mounting Hole Center to Center B | 2.81 in. | ||
Mounting Plane | horizontal, open side down | ||
Output Impedance (Zout) | 2.575 kΩ | ||
Springs | 3 | ||
Thickness | 0.04 in. |
Packaging Dimensions | 9.3 in. × 3.4 in. × 2 in. | ||
Weight (Packaging) | 0.6878 lbs. |
Sound Sample - Drum Machine Clap | All Models |
Sound Sample - Drum Machine Snare | All Models |
Sound Sample - Quick Strum | All Models |
Sound Sample - Staccato | All Models |
Sound Sample - Sustained Chord | All Models |
Sound Sample - Tremolo Chords | All Models |
Product Reviews
Works perfect fit existing mounting holes and sounds great
This reverb sounds great. I had to reposition it in the 1999 Blues Jr. to reduce the noise. Huge difference in decay and tone. This was a nice upgrade from the stock reverb. Highly recommend.
This Mod reverb tank I ordered for my Fender Princeton 112 Plus was a high quality upgrade and replacement for the defective original. Works perfectly. I am very pleased with the outstanding customer service I received from Amplified Parts. They are a solid, professional company committed to providing the best customer experience possible.
I bought this to replace the failed USA-made Accutronics tank in my 2007 Blues Junior. Works great. My only complaint is that the hole pattern was just enough off that it took awhile to get all 4 fasteners started.
I was getting static from my Blues Junior III whenever I turned the reverb up above 1 or 2, especially if I was over-driving the tubes. I found a forum where someone said it was likely the tank. I replaced the stock Ruby tank with the MOD and I've had no trouble since.
This really brought out the reverb in my Fender Super 112. Sounds like a new amp.
I replaced the reverb tank in my Fender Blues Jr. III NOS Tweed, a Ruby reverb tank...was never crazy about it. The MOD tank is a big improvement over the Ruby tank.
Works great. Slightly richer sound than the dual spring Accutronics unit that came in my amp. Screw holes even lined up for a clean swap. Still breaking it in, but very pleased with initial impressions!
The reverb tank arrived surprisingly fast to Canada (one week only), since it was shipped from California. The unit itself corresponds to description and works perfectly, providing an improvement compared the original noisy tank in my Fender Princeton 112 Plus guitar amp. Thanks to AmplifiedParts
Very good product, very satisfied, thanks to Amplified parts.