Speaker - Jensen® Vintage Alnico, 12", P12N, 50W
The AlNiCo P12N is surely one of the most iconic Jensen speakers of the late ‘50s. Visually impressive because of the big bell cover on the magnet, it is the highest powered 12” speaker in the range. Among others, the P12N was used in the high-end amps of the time such as the Fender® Tweed Twin. Crystal clear in the treble range with transparent mids and powerful but tight bass, it is the “King of Clean Tones”.
Guitarist Description: Very warm and full bodied tone with powerful mid-bite and sparkling highs. When presented with overdrive distortion it displays a bright and colorful crunch.
- Lows: Loose
- Mids: Aggressive
- Highs: Bright
- Overdrive: Edgy
For more information about our Jensen® speakers, see our tech corner article on Jensen Speakers.
SKU:
P-A-P12N-BELL-X
Item ID:
001972
Brand:
JensenJensen VintageAlnico
Magnet Type:
Size:
Type:
RoHS Compliant
Impedance | Our Part Number | UPC/EAN | Jensen Part Number |
---|---|---|---|
8 Ω | P-A-P12N-BELL8 | 8034028640292 | ZJ06040 |
16 Ω | P-A-P12N-BELL16 | 8034028641695 | ZJ06050 |
Basket Material | Pressed Sheet Steel | ||
Bell Cover Depth | 3.2047 in. | ||
Bell Cover Diameter | 6 in. | ||
Cone Material | Paper | ||
Depth | 6.9448 in. | ||
Diameter | 12 in. | ||
Diaphragm Area (SD) | 8 Ω version | P-A-P12N-BELL8 | 490.90 cm2 |
16 Ω version | P-A-P12N-BELL16 | 490.80 cm2 | |
Dust Dome Material | Solid Paper | ||
Equivalent Acoustic Volume (VAS) | 8 Ω version | P-A-P12N-BELL8 | 34.60 liters |
16 Ω version | P-A-P12N-BELL16 | 42.20 liters | |
Flux Density | 1.26 T | ||
Force Factor (BxL) | 8 Ω version | P-A-P12N-BELL8 | 10.62 Wb/m |
16 Ω version | P-A-P12N-BELL16 | 13.71 Wb/m | |
Inner Diameter | 10.9055 in. | ||
Linear Displacement, maximum (XMAX) | 1.00 mm | ||
Losses Electrical Resistance (RES) | 8 Ω version | P-A-P12N-BELL8 | 43.00 Ω |
16 Ω version | P-A-P12N-BELL16 | 70.00 Ω | |
Magnet Type | Alnico | ||
Magnetic Gap Depth | 8.00 mm | ||
Mechanical Compliance (CMS) | 8 Ω version | P-A-P12N-BELL8 | 101.00 µm/N |
16 Ω version | P-A-P12N-BELL16 | 125.00 µm/N | |
Mechanical Moving Mass (MMS) | 8 Ω version | P-A-P12N-BELL8 | 30.90 g |
16 Ω version | P-A-P12N-BELL16 | 27.00 g | |
Mechanical Q Factor (QMS) | 8 Ω version | P-A-P12N-BELL8 | 4.36 |
16 Ω version | P-A-P12N-BELL16 | 5.77 | |
Mounting Hole Bolt Circle Diameter | 11.5551 in. | ||
Mounting Hole Diameter | 0.2559 in. | ||
Musical Power | 100.00 W | ||
Nominal Overall Diameter | 307.00 mm | ||
Nominal Voice Coil Diameter | 38.00 mm | ||
Outer Diameter | 12.0866 in. | ||
Rated Power | 50.00 W | ||
Reference Efficiency (nO) | 8 Ω version | P-A-P12N-BELL8 | 3.40 % |
16 Ω version | P-A-P12N-BELL16 | 2.84 % | |
Resonance Frequency (ƒS) | 8 Ω version | P-A-P12N-BELL8 | 90.00 Hz |
16 Ω version | P-A-P12N-BELL16 | 91.00 Hz | |
Sensitivity @ 1W, 1m | 8 Ω version | P-A-P12N-BELL8 | 97.50 dB |
16 Ω version | P-A-P12N-BELL16 | 97.80 dB | |
Surround Material | Integrated Paper | ||
Surround Treatment | No | ||
Total Q Factor (QTS) | 8 Ω version | P-A-P12N-BELL8 | 0.77 |
16 Ω version | P-A-P12N-BELL16 | 0.84 | |
Voice Coil DC Resistance (Re) | 8 Ω version | P-A-P12N-BELL8 | 6.03 Ω |
16 Ω version | P-A-P12N-BELL16 | 12.00 Ω | |
Voice Coil Diameter | 1.5 in. | ||
Voice Coil Former | Kapton | ||
Voice Coil Inductance @ 1 kHZ (LE) | 8 Ω version | P-A-P12N-BELL8 | 0.87 mH |
16 Ω version | P-A-P12N-BELL16 | 1.05 mH | |
Voice Coil Winding Depth | 10.00 mm | ||
Voice Coil Winding Type | Copper |
Packaging Dimensions | 12.5984 in. × 12.5984 in. × 7.874 in. | ||
Weight (Packaging) | 8.5738 lbs. |
P-A-P12N-BELL8 - 8 Ω version | Basket Material | Pressed Sheet Steel |
Bell Cover Depth | 3.2047 in. | |
Bell Cover Diameter | 6 in. | |
Cone Material | Paper | |
Depth | 6.9448 in. | |
Diameter | 12 in. | |
Diaphragm Area (SD) | 490.90 cm2 | |
Dust Dome Material | Solid Paper | |
Equivalent Acoustic Volume (VAS) | 34.60 liters | |
Flux Density | 1.26 T | |
Force Factor (BxL) | 10.62 Wb/m | |
Inner Diameter | 10.9055 in. | |
Linear Displacement, maximum (XMAX) | 1.00 mm | |
Losses Electrical Resistance (RES) | 43.00 Ω | |
Magnet Type | Alnico | |
Magnetic Gap Depth | 8.00 mm | |
Mechanical Compliance (CMS) | 101.00 µm/N | |
Mechanical Moving Mass (MMS) | 30.90 g | |
Mechanical Q Factor (QMS) | 4.36 | |
Mounting Hole Bolt Circle Diameter | 11.5551 in. | |
Mounting Hole Diameter | 0.2559 in. | |
Musical Power | 100.00 W | |
Nominal Overall Diameter | 307.00 mm | |
Nominal Voice Coil Diameter | 38.00 mm | |
Outer Diameter | 12.0866 in. | |
Rated Power | 50.00 W | |
Reference Efficiency (nO) | 3.40 % | |
Resonance Frequency (ƒS) | 90.00 Hz | |
Sensitivity @ 1W, 1m | 97.50 dB | |
Surround Material | Integrated Paper | |
Surround Treatment | No | |
Total Q Factor (QTS) | 0.77 | |
Voice Coil DC Resistance (Re) | 6.03 Ω | |
Voice Coil Diameter | 1.5 in. | |
Voice Coil Former | Kapton | |
Voice Coil Inductance @ 1 kHZ (LE) | 0.87 mH | |
Voice Coil Winding Depth | 10.00 mm | |
Voice Coil Winding Type | Copper | |
P-A-P12N-BELL16 - 16 Ω version | Basket Material | Pressed Sheet Steel |
Bell Cover Depth | 3.2047 in. | |
Bell Cover Diameter | 6 in. | |
Cone Material | Paper | |
Depth | 6.9448 in. | |
Diameter | 12 in. | |
Diaphragm Area (SD) | 490.80 cm2 | |
Dust Dome Material | Solid Paper | |
Equivalent Acoustic Volume (VAS) | 42.20 liters | |
Flux Density | 1.26 T | |
Force Factor (BxL) | 13.71 Wb/m | |
Inner Diameter | 10.9055 in. | |
Linear Displacement, maximum (XMAX) | 1.00 mm | |
Losses Electrical Resistance (RES) | 70.00 Ω | |
Magnet Type | Alnico | |
Magnetic Gap Depth | 8.00 mm | |
Mechanical Compliance (CMS) | 125.00 µm/N | |
Mechanical Moving Mass (MMS) | 27.00 g | |
Mechanical Q Factor (QMS) | 5.77 | |
Mounting Hole Bolt Circle Diameter | 11.5551 in. | |
Mounting Hole Diameter | 0.2559 in. | |
Musical Power | 100.00 W | |
Nominal Overall Diameter | 307.00 mm | |
Nominal Voice Coil Diameter | 38.00 mm | |
Outer Diameter | 12.0866 in. | |
Rated Power | 50.00 W | |
Reference Efficiency (nO) | 2.84 % | |
Resonance Frequency (ƒS) | 91.00 Hz | |
Sensitivity @ 1W, 1m | 97.80 dB | |
Surround Material | Integrated Paper | |
Surround Treatment | No | |
Total Q Factor (QTS) | 0.84 | |
Voice Coil DC Resistance (Re) | 12.00 Ω | |
Voice Coil Diameter | 1.5 in. | |
Voice Coil Former | Kapton | |
Voice Coil Inductance @ 1 kHZ (LE) | 1.05 mH | |
Voice Coil Winding Depth | 10.00 mm | |
Voice Coil Winding Type | Copper |
Specification Sheet | All Models |
Breakup Sound Sample | All Models |
Characteristic Sound Sample | All Models |
Modern Clean Sound Sample | All Models |
Crunch Sound Sample | All Models |
Rock Chords Sound Sample | All Models |
Blues Sound Sample - | All Models |
Clean Sound Sample - | All Models |
Country Sound Sample - | All Models |
Jazz Sound Sample - | All Models |
Metal Sound Sample - | All Models |
Overdriven Sound Sample - | All Models |
Rock Sound Sample - | All Models |
Terminal Dimensions | All Models |
My Project Lists
Specifications, Files, and Documents
Sound Samples:
Blues Sound Sample -00:49https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_blues.mp3
Breakup Sound Sample00:32https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-p12n_breakup.mp3
Characteristic Sound Sample00:30https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-p12n_characteristic-sound.mp3
Clean Sound Sample -00:15https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_clean.mp3
Country Sound Sample -00:35https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_country.mp3
Crunch Sound Sample00:29https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-p12n_crunch.mp3
Jazz Sound Sample -00:43https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_jazz.mp3
Metal Sound Sample -00:55https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_metal.mp3
Modern Clean Sound Sample00:34https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-p12n_clean.mp3
Overdriven Sound Sample -00:15https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_overdriven.mp3
Rock Chords Sound Sample00:30https://www.amplifiedparts.com/sites/default/files/associated_files/p-a-p12n_rock-chords.mp3
Rock Sound Sample -00:42https://www.amplifiedparts.com/sites/default/files/associated_files/p12n_rock.mp3
Update Required To play the media you will need to either update your browser to a recent version or update your Flash plugin.
Questions? Contact us at [email protected], or give us a call at 480-296-0890
Product Reviews
Great speaker !! Built a High Power Tweed Twin
And it was only right to add these speakers.
Great tone !