Speaker - Celestion, 10", Vintage G10, 60W
A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling. With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow-sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack.
SKU:
P-A-G10V
Item ID:
001929
Brand:
CelestionCelestion Classic
Magnet Type:
Size:
Type:
Watts:
RoHS Compliant
Impedance | Our Part Number | UPC/EAN | Celestion Part Number |
---|---|---|---|
8 Ω | P-A-G10V-8 | T5373 | |
16 Ω | P-A-G10V-16 | 739894538152 | T5381 |
Chassis Type | Pressed Steel | ||
Cut-out Diameter | 9.0 in. | ||
D.C. Resistance (Re) | 8 Ω version | P-A-G10V-8 | 7.47Ω |
16 Ω version | P-A-G10V-16 | 12.33 Ω | |
Diameter | 10.1 in. | ||
Frequency Range | 100 Hz - 5,000 Hz | ||
Magnet Structure Diameter | 134 mm | ||
Magnet Type | Ceramic | ||
Magnet Weight | 31 oz. | ||
Mounting Hole Bolt Circle Diameter | 245 mm | ||
Mounting Hole Length | 6 mm | ||
Mounting Hole Width | 8 mm | ||
Mounting Slots | 4 | ||
Nominal Diameter | 10 in. | ||
Nominal Impedance | 8 Ω version | P-A-G10V-8 | 8 Ω |
16 Ω version | P-A-G10V-16 | 16 Ω | |
Overall Depth | 104 mm | ||
Power Rating | 60 W | ||
Resonance Frequency (ƒS) | 115 Hz | ||
Sensitivity | 97 dB | ||
Voice Coil Diameter | 1.75 in. | ||
Voice Coil Material | Round copper |
Packaging Dimensions | 11.4 in. × 10.8 in. × 5.3 in. | ||
Weight (Packaging) | 6.1597 lbs. |
P-A-G10V-16 - 16 Ω version | Chassis Type | Pressed Steel |
Cut-out Diameter | 9.0 in. | |
D.C. Resistance (Re) | 12.33 Ω | |
Diameter | 10.1 in. | |
Frequency Range | 100 Hz - 5,000 Hz | |
Magnet Structure Diameter | 134 mm | |
Magnet Type | Ceramic | |
Magnet Weight | 31 oz. | |
Mounting Hole Bolt Circle Diameter | 245 mm | |
Mounting Hole Length | 6 mm | |
Mounting Hole Width | 8 mm | |
Mounting Slots | 4 | |
Nominal Diameter | 10 in. | |
Nominal Impedance | 16 Ω | |
Overall Depth | 104 mm | |
Power Rating | 60 W | |
Resonance Frequency (ƒS) | 115 Hz | |
Sensitivity | 97 dB | |
Voice Coil Diameter | 1.75 in. | |
Voice Coil Material | Round copper | |
P-A-G10V-8 - 8 Ω version | Chassis Type | Pressed Steel |
Cut-out Diameter | 9.0 in. | |
D.C. Resistance (Re) | 7.47Ω | |
Diameter | 10.1 in. | |
Frequency Range | 100 Hz - 5,000 Hz | |
Magnet Structure Diameter | 134 mm | |
Magnet Type | Ceramic | |
Magnet Weight | 31 oz. | |
Mounting Hole Bolt Circle Diameter | 245 mm | |
Mounting Hole Length | 6 mm | |
Mounting Hole Width | 8 mm | |
Mounting Slots | 4 | |
Nominal Diameter | 10 in. | |
Nominal Impedance | 8 Ω | |
Overall Depth | 104 mm | |
Power Rating | 60 W | |
Resonance Frequency (ƒS) | 115 Hz | |
Sensitivity | 97 dB | |
Voice Coil Diameter | 1.75 in. | |
Voice Coil Material | Round copper |
Specification Sheet | All Models |
My Project Lists
Specifications, Files, and Documents
Questions? Contact us at [email protected], or give us a call at 480-296-0890
Product Reviews
I have a Laney VC30-210 and what began as a way of determining the build date of the amp (had to remove the chassis) ended up being a total clean out. I never liked the way the 10" Invaders sounded (dark and muffled) so I was sitting there looking at it with just a shell and the speakers and said, "Why not?" I had a lot of questions and Brad and Bill at Amplified Parts came through with the answers I needed. A special nod of the hat to Brad for his patience! I did compare the price of these speakers at both AP and a competitor and found AP to be waaaaaaaayyyyyyyyyyyy lower. So I ordered them and two days later they arrived! Took every bit of five minutes to have them mounted in the Laney shell. I went ahead and rewired the speakers from jack to speakers with 12 AWG speaker wire (it had what looks to be 18awg wire), quick connect clips on the speaker ears, and a new pancake plug for the amp. Long story short, I kept the British feel and flare, injected some USA-made electrical from the amp to the speakers and now this baby sounds like a champ! Amplified Parts is the bomb!