Products
No product page found for product tools.
Showing search results for tools
Showing results for tool. Search instead for tools
Wire Sleeving - Spaghetti, Old-Style, 11 AWG
11 AWG White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG available with part number S-M436W. This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.
Colors Available:
$0.85
Sold by the foot
Knob - Top Hat, Black with Silver Cap, Gibson Style
Black Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
$9.45
Switch - Les Paul 3 Position, US Retro-Fit, silver base
LP/PRS style 3 position pickup selector switch. M3.5 x 0.60 switch cap threading.
Cap Colors Available:
Starting at $7.95
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$3.85
Switch - GØRVA, Submini Toggle, SPDT, 2 Position, PC Pins, Medium Bat
Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
Features
- 5.59mm non-threaded bushing
- 2-Position On/On
- 4.95mm panel hole diameter
- Single pole/Double throw (SPDT)
- PC Pins
Features
- Power Rating: DC9V, 1A
- Contact Resistance: <20mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 30,000 Cycles
- RoHS & Lead-free
$1.35
Potentiometer - Tocos, RV24, Linear, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.
- 24mm diameter, single-turn potentiometers
- Carbon film element
- Metal shaft and bushing
- Panel mount
- Ear-lug solder terminals
- 6mm diameter slotted-end solid shaft
- 10mm bushing length
- 10mm shaft length (extended past bushing)
- Linear Taper
$8.30
Potentiometer - Bourns, Linear, Knurled Shaft, Mini
Bourns Mini Linear Taper Guitar pots. Mini Carbon Element, Split Shaft, Solder Lugs.
- 17mm Body Diameter
- ¼ watt
- 300° rotation
- ¼" Knurled 18-Spline Split Shaft
- ⅜" Bushing Length
- Tolerance: ±20 %
- Maximum Operating Voltage: 200V
Starting at $2.80
Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
- DPDT ( Double Pole/ Double Throw) switch
- 0.354" bushing length
- 0.409” bat length
- ¼" chassis hole diameter
- Solder terminals
Starting at $4.15
Switch - 5-Way lever for Stratocaster
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$11.35
Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$20.95
Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Colors Available:
Starting at $18.95
Wire - Weico, 24AWG Stranded, Top Coat Pre-Tinned, 300V, 50 feet
High quality 24AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required. This wire is ready to go as soon as it is cut and stripped making assembly that much easier. Rated at 300V and offered in a variety of colors, this wire is a great option for a variety of different projects.
Colors Available:
$8.95
Potentiometer - Bourns, Dual MN Taper, Knurled Shaft
Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing.
$2.79
Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
- Recommended .75 control cavity depth
- 1.406” center-to-center mounting hole spacing
- #4-40 screws recommended for mounting
- Screws not included
$5.35
Switch - GØRVA, Mini Toggle, DPDT, 3 Position, Solder Lugs, Medium Bat
Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
Features:
- 8.89 mm bushing length
- Medium bat
- 3-Position On/On/On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Features:
- Power Rating: DC9V, 1A
- Contact Resistance: <10mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 40,000 Cycles
- RoHS & Lead-free
$1.95
Tuner Knob - Kluson, Butterbean, Plastic, for tuners
Replacement Butterbean (oval) press-on button for Kluson® tuning machines. Correct for vintage applications.
Colors Available:
$2.10
Solder wick - GC Braid, multiple sizes
5 foot long desoldering braid. Great for removing solder from printed circuit boards or other electronic equipment.
Starting at $5.75
Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
Note: On-On switches may sometimes be referred to as On-None-On.
- SPDT ( Single Pole/ Double Throw) On-On switch
- 0.275" bushing length
- 0.270” bat length
- ¼" chassis hole diameter
- Right angle, PC Mount terminals
Note: On-On switches may sometimes be referred to as On-None-On.
$3.85
Strap Buttons / Pins - Gotoh, EP-B2, Vintage Style
Gotoh’s EP-B2 is a high quality set of vintage style strap buttons that fit nicely on any guitar or bass. These buttons match the look of the classic strap buttons but are finely machined and plated for a high quality appearance. This set includes two strap buttons and two matching screws.
Colors Available:
Starting at $2.80
package of 2
Control Plate - Telecaster Style, for ⅜” Bushing Pots
Tele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).
Colors Available:
- Two potentiometer mounting holes for 3/8” bushing diameters
- One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
- Made in Korea
Starting at $6.95
Pickup Kit - Build Your Own Humbucker
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
Starting at $19.75
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.85
Switch - Carling, Mini Toggle, DPDT, 2-Position, PC Pins
0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
$3.59