Products
No product page found for product tools.
Showing search results for tools
Showing results for tool. Search instead for tools
Heat Shrink - ¼" Diameter x 6" Long, 23 Pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.
$8.95
package of 23
Fret Press - Handheld, 4 cauls, for seating frets
Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot - you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck. Used with radius inserts (S-T261) to press frets into guitar fret boards. This method is preferred by many as an alternative to hammering the frets in. Includes 4 interchangeable support cauls.
$109.95
Wrench - Dunlop, System 65, Uni-wrench
The Dunlop System 65 Uni-Wrench is great tool for tightening and loosening any threaded nut on a guitar or bass. This includes pots, jacks, bridge posts, rounded knurled nuts on selector switches and more.
$14.99
Routing Jig - for Soundhole & Rosette
Soundhole and Rosette routing jig. Adjustable from 2” diameter to 6” diameter. Includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).
$54.95
Soldering iron station - Weller, WE 1010, 70W, digital display
The Weller WE1010 is an excellent soldering station for professional use and beginner hobbyists alike. With increased power and stability, the WE1010 is an upgrade in many ways for users of the WES51 and WTCPT soldering stations.
$165.95
Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
- Measures fret height before AND after fret installation
- Accurate readouts in inches or millimeters
- A must for all precision guitar work
$44.95
Hot Glue Gun - Atten, JQ-050, 50W
Atten JQ-050 50W hot glue gun. This glue gun is a great tool for diy projects of all kinds. With 50W of power and a fast heat time, using the gun is quick and easy. This glue gun uses 7mm glue sticks.
- Rapid heating for quick use
- Smooth glue delivery
- Simple and convenient use
- Suitable for DIY toys assembly, handmade items, repairs and more
$11.95
Kit - BusBoard, Junior Genius Blinky Lights Kit
Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard. Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper. You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value. This next-generation science kit doesn’t seal the parts into simplified plastic blocks.
$27.95
Screwdriver - Dunlop, System 65, four bits for guitars
The Dunlop System 65 Screwdriver is the perfect small sized tool for a gig bag or case. The four bits include two different Phillips heads and two different flat heads which can cover almost any screw used on guitars and basses.
$10.99
String Cutters - Dunlop, System 65, Compact
The Compact String Cutter delivers enough pounds per square inch to cut through just about any string. Don’t let the diminutive size fool you. The Compact String Cutter is made from chromium-vanadium steel with a laser-cut edge for strong, precise cuts.. Dunlop even tested it on a .160-gauge bass string, and the cut was fast and clean. This tool will do all the hard work for you—just give it a squeeze, and let that laser-cut edge do its thing. Keep a Compact String Cutter in your gig bag for quicker and easier string changes.
$14.99
Seizer forceps - Xcelite, 5.5" straight nose, serrated jaws
Seizer forceps. Product Features:
- Versatile tool with unusual holding qualities
- Clamps firmly to hold wires for soldering
- Acts as a heat sink and retrieves small parts from hard-to-reach places
- Precision-machined from perfectly tempered stainless steel
- Box-joint construction
- 3-position snap lock
- Serrated jaws
$17.35
Effects Pedal - Maxon, GE601, Graphic Equalizer
The Maxon GE601 graphic equalizer is the perfect tool for dialing in guitar tone. The six bands are set with slide potentiometers offering precision controls with a visual representation of the sound spectrum. Each band can both cut and boost sound for a variety of tonal shaping effects as well as frequency specific boost effects.
Features
Features
- Six-band graphic eq with an overall level volume capable of producing various sounds
- Bands cover 100Hz to 3.2KHz for effective tone shaping with guitars
- Each band can cut or boost providing a variety of uses
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
$120.95
Parts Kit - V828 Italian Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$55.02
Chisel - Flat, Japanese, Micro, 1.1mm
Small flat chisel with an offset handle allowing this tool to easily get into tight spaces for luthier work. The 1.1mm blade is made of high quality HSS steel and is perfect when precision is required for nut slots and elsewhere. Made in Japan.
$35.95
Soundhole Kit - Router Base and Jig
This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette. Kit includes:
The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).
- S-T235
- S-T256
The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
- Excellent control
- Easy installation
- Accurate freehand routing
Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).
$99.65
Tech Kit - GrooveTech, for Guitar Player
The GrooveTech Guitar Player Tech Kit has everything you need to take care of your guitar with confidence, featuring top-shelf tools that have been optimized for just about every make and model of guitar. For your truss rod and string action adjustments, take your pick from the 11 color-coded hex wrenches—gold for metric, black for imperial. Truss rod sizes come with ball ends for hard-to-reach nuts. Check your neck relief with the capo and thickness gauge and your string action with the ruler. The 6-in-1 screwdriver, which comes with two Phillips bits, two slotted bits, and two nut drivers, allows for easy tightening or removal of various hardware pieces. Remove your strings in no time with the string cutters—they’ll cut through even bass strings with ease—and then string up again with a fast-action string winder. Tools are guaranteed with a limited lifetime warranty. Never worked on your instrument before?
$64.95
Tailpiece - Graphtech, ResoMax NV, AutoLock
ResoMax NV tailpiece is made from Graphtech’s lightweight, high-strength Resomax material that will increase harmonic content and leave your guitar dripping with tone. This is a great option to upgrade or replace the existing tailpiece on any electric guitar that currently has a standard tune-o-matic bridge and tailpiece combo. Equipped with AutoLock, this tailpiece magnetically locks the bridge to the body of the guitar without a tool making restringing a breeze. Graphtech’s Resomax tailpieces ship with metric posts and bushings. Please see the measurement guide to verify compatibility.
Colors Available:
$60.73
¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $2.35
Wire - Gavitt, Cloth, 22AWG Stranded, Top Coat Pre-Tinned
High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.
Colors Available:
$0.89
Sold by the foot
Potentiometer - Alpha, Linear, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - Alpha, Audio, ⅜" Bushing
Standard fit for most vintage American made tube amps.
$1.90
Potentiometer - CTS, Audio, Knurled Shaft, ⅜" Bushing
The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:
Includes:
- 1 nut
- 1 lock washer
$5.45
Potentiometer - CTS, Audio, Solid Shaft
- Body Diameter: 24 mm
- Power Rating 1/3 watt
- Bushing Diameter: 3/8" (Threading: 3/8-32)
- Bushing Length: ⅜"
- Shaft Diameter: ¼"
- Shaft Length: 3/8"
- Shaft Material: Aluminum - Solid Shaft
$4.95
Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
- Non- inductively wound polyester film/foil construction
- Radial lead
- 10% tolerance
- 100v voltage rating
- Rated for 85°C operation
- Tinned copper-clad steel leads
Starting at $2.15