Products
No product page found for product tools.
Showing search results for tools
Showing results for tool. Search instead for tools
Truss Rod Wrench - Phillips Head / Cross Head
High quality Phillips head truss rod wrench. This Japanese made wrench is the perfect tool for cross slotted truss rod nuts found on many Fender® necks. The compact 9mm diameter head has a thin 11mm width allowing for adjustments without removing the neck
$10.16
Fret Puller - Narrow Jaws, for removing frets
A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets. The special flush ground 1/2" jaws can easily bite the frets without damaging the fretboard.
$7.95
Metal Stamp Set - 0-9 Digits, 0.125” Numeral Height
Metal stamp set with nine stamps for the numbers 0 through 9. The 6 stamp is also used for 9. The height of a stamped numeral is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
$6.50
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10
Power String Winder - Duck's Deluxe, color may vary
Fits any adjustable drill or adjustable screwdriver. One size for: guitars, bass, banjos, mandolins, steel guitars, dobros, jazz boxes, etc.
Color pictured is an example. Actual color may vary
- Precision molded solid body
- No more manual winding ... string your instrument in minutes!
- Direct drive to the tuning keys
- Plastic, will not scratch tuner buttons.
- The ultimate restringing tool for effortless string replacement
Color pictured is an example. Actual color may vary
$4.15
The Nibbler - cutter for square holes
Instructions
- Simply drill 3/8" hole insert cutting head and compress handles.
- Gives you the ability to make square holes for fuse holders, special connectors displays etc.
- Material to be nibbled is placed in the gap between the punch and blade channel.
- By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
- A scribe line can be followed by looking down on work in this position.
$6.99
Wrench - Steel, Multi-Spanner, for guitar components
A small, easily-portable tool designed for quick adjustments of various instrument parts (including nuts and thumb wheels), from potentiometers and pickup switches to tuning machines. One end is designed for loosening, the other is designed for tightening. The device has been chamfered and polished to avoid damage to your instrument when used.
$9.05
Fret Files - for Filing Fret Crowns
Solid steel crowning files with dual cutting edges for precision fret crowning. These should be in any luthier’s tool kit!
- Made of solid steel
- Soft rubber coating on the handle
- Double sided (both sides are the same size)
- 4-3/16” cutting surface
- Available in three sizes to cover most fret sizes (small,medium,large)
$29.95
Brush - Befaco, Gear Duster
Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.
$12.95
Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
Tools are:
- 8282 Zenith type Hex/Screwdriver
- 8606 5" Hex wrench
- 9091 Hex iron core tool
- 9300 5" Double sided hex tool
- 9304 Hex screwdriver combination
- 8608 Potentiometer Adjustment Tool
$8.45
package of 6
Turrets - Bifurcated, Screw Mount
Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.
$5.99
package of 10
Turrets - Bifurcated, for use on 2mm boards
Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.30
package of 10
Label - 4-Band Resistor Color Code Chart
Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.
$2.95
String Action Gauge - Dunlop, System 65
The Dunlop System 65 String Action Gauge is a precision measurement tool for setups and adjustments. The gauge includes both metric and imperial measurements on opposite sides.
$14.99
Alignment Kit - GC Electronics, for CB
Contains
- 5009 Duplex no-metal screwdriver
- 5097 K-tran tool
- 8271 core aligner
- 8282 Zenith alignment tool
- 9091 hex iron core tool
- 9440 transistor tool
- 8276 Duplex aligner
- 9304 double end tool
$21.65
package of 8
String Spreader - for fret work without unstringing
Those of us who don’t want to fully remove that new set of strings to do some quick spot work on the fret board or nut will love this simple yet effective tool. Simply loosen your strings and place the string spreaders underneath the guitar neck. Bring the strings off the neck and latch them underneath the spreader's ends to allow for quick and easy fret-board work without the need to unstring your instrument. These string spreaders will quickly become a must have in your toolbox!
- Make room for cleaning, polishing or spot work on frets without removing strings
- Made of brass with a soft, finish safe, rubber coating
$8.95
package of 2
Solvent - Silicone Rubber Adhesive, IS-808, clear
Momentive clear IS808 adhesive sealant is compatible with rubber materials with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. Made in the USA.
$11.45
Fret Setter - 10 cm long, for reseating without unstringing
The contact surface of this solid brass tool fits over the crown of a fret and reseats loose fret ends without unstringing the instrument. Place the end of the tool on the crown of the fret and tap with a hammer. Also works well for pressing loose fret ends down while supergluing.
$14.95
Guitar Nut Cube - for adjusting guitar nuts
Unique tool for the easy removal and adjustment of potentiometers and switches from guitars
$15.95
Heat Shrink - ~\frac{3}{16}~" Diameter x 6" Long, 27 Pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 27.
$9.95
package of 27
Radius Gauges - 2 Gauges for 8 Radiuses
Solid, high quality stainless steel radius gauges. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench.
- Gauge 1 has 7.25", 9.5", 10", and 12" radiuses
- Gauge 2 has 14", 15", 16", and 20" radiuses
- Set of 2
$13.95
package of 2
Scraper Set - 120mm x 44mm, Standard Set of 2
Luthier tool, set of 2 scrapers for wood working. 0.4mm thickness.
$11.50
package of 2
Wrench - Befaco, Bananut Driver
Custom wrench tool for Bananuts. The two pegs slot into the notches on the Bananuts for an easy installation. Note: This wrench is only compatible with Befaco Bananuts
$6.50
Radius Gauges - Notched, stainless steel
Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.
- Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
- Gauge 3+4 has 14", 15", 16", and 20" radiuses
- Notched version great for taking measurements with strings on
- Set of 4
$29.95
package of 4