 | Bourns Model 82 Vintage Premium Guitar Potentiometers (82A1D), Knurled Split Shaft In response to market demand, Bourns has re-released the Model 82 Vintage Guitar Potentiometer. This model was originally released in the late 70s and made its way into custom guitar shops, where artists quickly recognized its superior performance. More... | $16.90 |
 | Bourns Guitar & Amp Potentiometers (PDB241-GTR), 24mm, Solid Shaft Bourns Guitar and amplifier pots. These are drop in replacement components. Linear and audio tapers available in values from 25K up to 1 Meg. More... | $2.60 |
 | Bourns Model 95 Premium Guitar Potentiometers (95A1D), Knurled Split Shaft Bourns also offers premium guitar pots with long-life and extremely low noise. The Model 95A1D with knurled or solid shaft is available in an audio or linear taper, and in a variety of standard resistance values including 25 kΩ and 50 kΩ for guitars with active electronics. For thick body guitars, Model 95Z1D offers a long bushing and shaft with similar resistance and taper values. Features: Conductive polymer element 1/4" Knurled Split Shaft 3/8" Bushing Width, 3/8" Bushing Length Low roll-on, low noise Tolerance: ±20 % Very low noise Power Rating: 0.25 watt More... | $9.95 |
 | Bourns Model 95 Premium Guitar Potentiometers (95Z1D), Knurled Split Shaft, Long Bushing Bourns also offers premium guitar pots with long-life and extremely low noise. The Model 95A1D with knurled or solid shaft is available in an audio or linear taper, and in a variety of standard resistance values including 25 kΩ and 50 kΩ for guitars with active electronics. For thick body guitars, Model 95Z1D offers a long bushing and shaft with similar resistance and taper values. Features: Conductive polymer element 1/4" Knurled Split Shaft 3/8" Bushing Width, 3/4" Bushing Length Low roll-on, low noise Tolerance: ±20 % Very low noise Power Rating: 0.25 watt Long rotational life Bourns Series Number: 95Z1D | $17.50 |
 | Bourns Mini Guitar Potentiometers w/ Push Pull Switch (PDB183-GTR), Knurled Split Shaft Bourns® Model PDB183-GTR Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching. This application note addresses utilization of the PDB183-GTR to enable split-coil pickup switching in electric guitar humbucking pickups. Bourns® Model PDB183-GTR Guitar Potentiometer with Push-Pull Switch is designed to allow the guitarist switching capability and volume or tone controls with a single 18 mm package size potentiometer. The potentiometer is designed with a single shaft that is used to activate the Double-Pole, Double-Throw (DPDT) switch and to adjust the potentiometer. The DPDT switch can be wired for various switch functions. Features: Carbon element DPDT push-pull switch 1/4" Knurled Split Shaft 3/8" Bushing Width, 3/8" Bushing Length Tolerance: ±20 % Power Rating: 0.1 watt Bourns Series Number: PDB183-GTR | $9.95 |
 | Bourns Dual Mini Guitar Potentiometers w/ Push Pull Switch (PDB183-GTR21), Knurled Split Shaft Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching. This application note addresses utilization of the PDB183-GTR21 to enable split-coil pickup switching in electric guitar humbucking pickups. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch is designed to allow the guitarist switching capability and volume or tone controls with a single 18 mm package size potentiometer. The potentiometer is designed with a single shaft that is used to activate the Double-Pole, Double-Throw (DPDT) switch and to adjust the potentiometer. The DPDT switch can be wired for various switch functions. Features: Carbon element DPDT push-pull switch 1/4" Knurled Split Shaft 3/8" Bushing Width, 3/8" Bushing Length Tolerance: ±20 % Power Rating: 0.1 watt Bourns Series Number: PDB183-GTR21 | $7.95 |
 | Bourns Model 82 Vintage Premium Guitar Potentiometers (82A1D), Solid Slotted Shaft In response to market demand, Bourns has re-released the Model 82 Vintage Guitar Potentiometer. This model was originally released in the late 70s and made its way into custom guitar shops, where artists quickly recognized its superior performance. Referred to as the "square blue pot," this product has withstood the test of time, with some artists noting that they have still have the original guitar potentiometers in their instruments. The Model 82 Vintage Guitar Potentiometer is available with standard bushing, and now also available with long bushing for through-body mounting. Features: Conductive polymer element 1/4" Solid Slotted Shaft 3/8" Bushing Width, 3/8" Bushing Length Low roll-on, low noise Tolerance: ±10 % Power Rating: 0.25 watt Bourns Series Number: 82A1D | $9.95 |
 | Bourns Dual Mini Guitar Potentiometers w/ Push Pull Switch (PDB183-GTR21), Solid Shaft Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching. This application note addresses utilization of the PDB183-GTR21 to enable split-coil pickup switching in electric guitar humbucking pickups. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch is designed to allow the guitarist switching capability and volume or tone controls with a single 18 mm package size potentiometer. The potentiometer is designed with a single shaft that is used to activate the Double-Pole, Double-Throw (DPDT) switch and to adjust the potentiometer. The DPDT switch can be wired for various switch functions. Features: Carbon element DPDT push-pull switch 1/4" Solid Shaft 3/8" Bushing Width, 3/8" Bushing Length Tolerance: ±20 % Power Rating: 0.1 watt Bourns Series Number: PDB183-GTR21 | $7.95 |
